Chrysler Sapphire Silver Metallic (368/5368/BS3) Touch Up Paint

The Look

This color defined the era of the Chrysler Crossfire, bringing a cool, European sophistication to the American lineup. It is not a standard, neutral silver; it carries a distinct icy blue undertone that shifts depending on how the sun hits the curves of the body. Since your car has likely lived on the road since the mid-2000s, the original finish has weathered the elements, making these repairs vital to preserving that crisp, metallic aesthetic.

Technical Details

This is a traditional metallic finish, which presents a specific challenge for the DIYer. Before you spray or dab Chrysler Sapphire Silver Metallic (check for code 368/5368/BS3), you need to shake it for 60 seconds. The silver and blue flakes inside the container are heavy and will settle at the bottom. If they aren't fully suspended, the paint will come out looking like a flat, dark gray instead of a bright metallic. To avoid mottling-those unsightly dark clouds or stripes-keep the container moving at all times to ensure the flakes lay down in an even, consistent pattern.

Best Practices

You can usually find your paint code on the driver-side door jamb or on a metal plate located on the radiator support under the hood. Because silver is sensitive to thickness, always test the color on the included card first. If the color looks too dark, your layers are too heavy. Apply the paint in thin, light coats to help the metallic particles align properly. Allow for adequate drying time between layers so the paint sets firm. Once the color is uniform, you must apply a clear coat to provide the necessary gloss and protect the metallic flakes from turning dull over time.