Fleetwood Clearwater Blue Metallic (U7-60056) Touch Up Paint

The Look

This shade represents the peak of early 2000s motorhome styling. It is a deep, nautical blue that helped transition the RV world away from dated beige boxes into the modern era of full-body paint. On a massive coach, this color provides a regal presence that hides road film better than darker navies but still looks expensive under the sun. Since your motorhome has been navigating highways for a long time, you will find this metallic has a depth that catches the light differently depending on the angle of the panels.

Technical Details

This is a metallic finish, which means it relies on tiny flakes to create that signature shimmer. Working with metallics requires a bit of finesse because those flakes like to settle at the bottom of the container. If you apply the paint too heavily in one area, the flakes will bunch up and create dark, muddy patches. It is a sensitive balance. You need enough flow for the paint to lay flat, but not so much that you create stripes across the side of your rig.

Best Practices

Before you spray or dab Fleetwood Clearwater Blue Metallic (check for code U7-60056), you need to shake it for 60 seconds to ensure the metallic particles are fully suspended. You can typically find your paint code on a sticker inside a bedroom closet or tucked into an upper kitchen cabinet. Always test the color on the included card before you touch the actual panel. Whether you are using a nozzle or a brush, keep the container moving to avoid pooling or heavy spots. Allow for plenty of drying time between layers to let the color build naturally. If you are working outside, make sure you are parked in the shade so the surface does not get too hot, which can cause the paint to dry before the flakes have a chance to level out.