GMC Berry Metallic (87/WA811K) Touch Up Paint

The Look

This is a deep, sophisticated red that stood out from the sea of fleet-white vans during its short run in the mid-2000s. While most work vehicles are built for utility, this shade gives the Savana a more professional, finished appearance. Since your vehicle has been on the road for nearly two decades, the original paint has likely faced plenty of sun and road debris. This makes the surrounding finish a bit more matte than it was on day one, so keep in mind that a fresh application will always have more depth and shine than the aged panels around it.

Technical Details

This finish is a true metallic, which means it relies on tiny flakes to reflect light and create that "berry" depth. Metallic paints are prone to a problem called mottling, where the flakes cluster together and create dark spots or uneven stripes in the finish. This happens most often if the paint is applied too heavy in one spot or if the surface is too cold. Before you spray or dab GMC Berry Metallic (check for code 87/WA811K), you need to shake it for 60 seconds. This ensures those flakes are suspended evenly so you don't end up with a patchy repair that looks darker than the rest of the door.

Best Practices

You can usually find your paint code on the service parts identification sticker located under the driver seat or on the rear face of the right-side door pillar. Once you have the area clean, test the color on the included card to confirm the shade matches your current level of fade. When you start the repair, apply the paint in thin, light layers rather than one thick coat. Keep the container moving at all times to prevent the metallic flakes from pooling. Allow for plenty of drying time between layers, and if you are using a clear coat afterward, wait until the color is dry to the touch so you don't smear the metallic pattern you just laid down.