Harley-Davidson Bright Red Tricoat (930104) Touch Up Paint

The Look

This color isn't for the shy. In 2010, Harley-Davidson wanted a red that looked like it was still molten, and they applied it across the entire lineup. Whether it's on a Sportster or a full-dress Ultra Classic, this red has a depth that makes the bike look like it's glowing from the inside out. Since your bike has likely seen a decade of sun and road grit, you'll notice that this finish holds its vibrance better than a standard solid red, provided you maintain that top-layer gloss.

Technical Details

You are dealing with a tricoat finish, which means the magic happens in layers. This isn't a simple one-and-done application. It relies on a ground coat followed by a translucent mid-coat that provides the depth and pearlescent pop. The risk here is thickness. If you apply the mid-coat too heavily with your brush or nozzle, the repair will turn out darker and "muddier" than the factory finish. You want to build the color slowly to mimic the way the factory applied it in the garage.

Best Practices

Before you spray or dab Harley-Davidson Bright Red Tricoat (check for code 930104), you need to shake it for 60 seconds. Harley is notorious for not stamping paint codes directly on the frame, so you usually have to find this code in your owner's manual or by running your VIN. When you're ready to work, keep the container moving to ensure the metallic particles don't clump. Always test the color on the included card first; this allows you to see exactly how many layers of the mid-coat you need to hit the right shade. Let the bike sit in the shade during the drying time to ensure the finish sets hard and smooth without interference from direct heat.