Infiniti Anthracite Gray Metallic (KAV) Touch Up Paint

The Look

This color is the uniform of executive luxury. Since your QX80 is a large vehicle, this shade works in its favor by emphasizing the heavy, industrial lines of the body. It sits in that sweet spot between a standard silver and a deep black, providing a look that resembles polished granite or cold steel. It is a practical choice for a daily driver because the mid-tone gray hides road dust and light salt spray better than almost any other color in the lineup. While it looks formal in the shade, the finish reveals a lot of character once you pull it out of the garage and into the sunlight.

Technical Details

This is a true metallic finish, which means the paint is packed with tiny flakes that catch the light. These particles are what give the surface its depth, but they also require a steady hand during repair. If you apply the paint too thick in one spot, the metallic flakes will bunch together and create a dark, muddy patch that won't match the rest of the panel. To keep the finish looking uniform, you should apply several thin layers rather than one heavy coat. Before you spray or dab Infiniti Anthracite Gray Metallic (check for code KAV), you need to shake it for 60 seconds to ensure those flakes are evenly distributed.

Best Practices

You will find your paint code on a silver or white sticker located on the driver's side door jamb, usually near the latch or the bottom of the pillar. When you are ready to begin, find a spot in the shade with minimal wind. Temperature matters here; if it is too cold, the metallic flakes will sink, and if it is too hot, the paint will dry before it can level out. Test the color on the included card to get a feel for the flow of the paint before you touch the car. Keep the container moving at a consistent speed to prevent the paint from pooling. Once the color is dry, you will need a clear coat to bring out the shine and protect the repair from the elements.