Jaguar Antigue Metallic (840/JGZ) Touch Up Paint

The Look

Your Jaguar wears a color from a very specific window in the brand's history. Since this finish was only available for a short time around 1997, it marks the era when the brand transitioned from the sharp angles of the older XJ series to the liquid curves of the early XK8. It is a sophisticated teal that shifts its character depending on the weather. In the shade, it looks like a deep, brooding forest green, but once the sun hits the body lines, the blue undertones come alive. Because your car has lived through several decades, the original finish has likely developed a unique character from UV exposure, making a careful touch-up essential for maintaining that jewel-like depth.

Technical Details

This is a metallic finish, which means it relies on a precise suspension of tiny flakes to create its signature glow. Metallic paints can be temperamental because those flakes like to settle at the bottom of the container or clump together during application. If the flakes don't lay down flat, you will see dark spots or "mottling" that makes the repair look like a bruise on the panel. To avoid this, you must focus on the flow of the paint. Applying one heavy, wet coat is a mistake that leads to sagging and uneven color. Instead, use several light, even passes to build the depth. This patience ensures the metallic particles distribute themselves evenly across the surface.

Best Practices

Before you spray or dab Jaguar Antigue Metallic (check for code 840/JGZ), you need to shake it for 60 seconds. You should find your paint code on a metal plate or sticker located on the driver's side door pillar or occasionally under the bonnet near the latch. Once you have confirmed the code, test the color on the included card to see how it reacts to your specific lighting. If you are working in a garage or a patch of shade, keep the container moving at a steady pace to prevent the paint from pooling. Between each layer, allow enough drying time so the surface is no longer tacky. Finishing with a clear coat is the only way to match the factory gloss and protect the metallic flakes from oxidizing over time.