Jeep Sherwood Green Metallic (1C) Touch Up Paint

The Look

The early eighties were a time of earth tones and outdoor utility, and this deep, mossy shade defined that AMC era. Whether it sits on a CJ-7 or a classic Grand Wagoneer, the color feels right at home among pine trees and trail dirt. Because your Jeep has likely spent forty years battling the sun and the elements, the existing paint might have lost some of its original depth or shifted in hue. This color is a time capsule of the 1981 through 1983 production years, and keeping it looking fresh is the best way to honor the heritage of your rig.

Technical Details

This is a metallic finish, which means it contains fine metal flakes that give the green its shimmer. Metallics are notorious for mottling-where the flakes bunch up and create dark, cloudy spots-if the paint is applied too heavily in one spot. To prevent this, you should avoid heavy dabbing or thick coats that saturate the surface. Instead, focus on light, thin layers that allow the flakes to lay flat and catch the light. This creates the depth you expect without the blotchiness that ruins a good repair.

Best Practices

On these vintage models, you can usually find your data plate bolted to the firewall under the hood or sometimes on top of the radiator support bar. Before you spray or dab Jeep Sherwood Green Metallic (check for code 1C), you need to shake the container for a full minute to get those metallic flakes suspended. Test the color on the included card to see how it matches your current level of fade. When you start, keep the container moving across the surface to prevent the paint from pooling in the center of the repair. Let each layer have enough drying time so it feels tacky but not wet before you add another layer.