Kia Silky Beige Metallic (D3) Touch Up Paint

The Look

Your Sedona lived through the heyday of the early 2000s, and this color was the badge of the premium family hauler. It is a warm, champagne-leaning shade that was designed to look sophisticated under suburban streetlights while hiding a week's worth of road dust. Since your Kia has likely been on the road for two decades, the original finish has probably mellowed. This beige is not just a neutral choice; it is a practical one that handles the aging process better than almost any other color from that era.

Technical Details

This is a true metallic finish, which means the paint is packed with tiny reflective flakes that give it that signature silk-like glow. Before you spray or dab Kia Silky Beige Metallic (check for code D3), you need to shake it for 60 seconds. Metallics are notorious for "mottling," where the flakes clump together and create dark, uneven patches. If you apply the paint too thick in one go, those flakes will sink and look muddy. The goal is to let the flakes lay down flat and even so they catch the light the same way the rest of the van does.

Best Practices

You can confirm your color match by looking at the sticker on the driver's side door jamb; Kia made it easy by tucking the two-digit code right there. Before you touch the car, test the color on the included card to ensure the shade matches your current level of fade. When you start the repair, keep the container moving in steady, overlapping passes. If you are using a pen or a brush, resist the urge to glob it on. Use thin layers and allow plenty of drying time between them. This patience prevents the metallic flakes from swimming around, ensuring your repair remains invisible rather than a heavy, dark spot on your fender.