Land-Rover Aegean Blue (LRC490) Touch Up Paint

The Look

This color captures a specific moment in the late nineties when Land Rover moved away from basic utility toward a more sophisticated palette. It is a deep, aquatic teal that shifts between a moody blue and a forest green depending on how the sun hits the panels. Since your vehicle has been on the road since 1997, the original finish has likely developed a unique character from years of sun and weather. This shade was a short-lived choice for the Discovery and Defender lineups, making it a rare sight today. It brings a refined, coastal energy to the rugged lines of a classic 4x4, but because it is quite dark, it will show every bit of dust and trail salt if you don't keep it clean.

Technical Details

This is a metallic finish, which means the paint is loaded with tiny flakes that provide that signature shimmer. These flakes are the most difficult part of a repair because they are heavy and want to sink to the bottom of the container. If you apply the paint too thick or too fast, the metal bits clump together and create dark, blotchy patches called mottling. To get a consistent look that matches the rest of the bodywork, you must apply the color in several very thin layers rather than trying to cover the spot in one go. You will also need a clear coat over the top to protect the metal particles and bring out the deep blue depth.

Best Practices

Before you spray or dab Land-Rover Aegean Blue (check for code LRC490), you need to shake it for 60 seconds. You can usually find this paint code on a silver or black plate riveted to the radiator slam panel under the hood. Once you locate it, clean the repair area with a grease remover. Test the color on the included card to ensure the metallic flake density looks right before you touch the car. When applying, keep the container moving and maintain a steady spray distance to prevent the flakes from pooling. Give each layer enough drying time so the surface isn't tacky before the next pass. If you are using a pen or brush, use light, dabbing motions to keep the metallic particles evenly distributed.