Lexus Medium Blue Metallic (Cladding) (UCAB1) Touch Up Paint

The Look

Your Lexus LS400 or LS Series was a masterclass in late-90s executive design, and this specific shade played a huge part in that aesthetic. This color isn't for the main body of the car; it was specifically designed for the lower body panels, known as the cladding. It provides a deep, muted contrast that grounds the vehicle, giving it that classic two-tone appearance that defined luxury at the turn of the millennium. Since your car has likely been on the road for over two decades, this cladding has faced everything from road salt to sun exposure, making a fresh touch-up essential for restoring that crisp, factory-floor silhouette.

Technical Details

This is a metallic finish, which means it contains tiny flakes designed to catch the light and add depth. When you are applying Lexus Medium Blue Metallic (Cladding) (look for code UCAB1), you need to be mindful of how those flakes settle. If you apply the paint too heavily in one spot, the metallics can bunch together, creating a dark, blotchy effect known as mottling. To keep the finish looking uniform and professional, you want to build the color in light, even layers rather than trying to cover the area in one go.

Best Practices

Before you begin, open the driver's side door and look at the door jamb for a sticker labeled C/TR; this is where you will confirm your paint code. Because this paint contains heavy metallic particles that settle at the bottom of the container, you must shake it for at least one full minute. If you are using a spray can, keep the container moving across the surface to ensure an even flow and maintain a consistent spray distance. If you are using a pen or brush, dab lightly rather than wiping. Always test the color on the included card before you touch the car to ensure the shade is a match. Allow for a longer drying time between layers to prevent the paint from sagging on the vertical cladding panels, especially if you are working in your garage or in the shade.