Lund Charcoal (Catalyzed Spray Can Only) (51441) Touch Up Paint

The Look

Lund established a specific visual identity for their 2023 fleet, and this deep charcoal is the anchor of that aesthetic. Whether your boat is a rugged Pro-V or a versatile Crossover, this color provides a professional, industrial finish that hides the minor scuffs of a long season on the water. It is not a basic grey; it has a depth that makes the hull look substantial and modern. Because your boat lives in a high-UV environment and deals with constant water contact, this specific shade was engineered to maintain its saturated look without fading into a dull slate after a few months under the sun.

Technical Details

You are working with a metallic finish, which presents a specific set of challenges during the repair. The paint is packed with fine metallic flakes that give the hull its signature shimmer. If you apply the paint too heavily in one spot, those flakes will sink and cluster, creating dark, blotchy patches. If you apply it too dry, the surface will feel rough. The "Catalyzed" nature of this product means it contains a hardener that provides a chemical bond much stronger than standard paint. This is a massive benefit for a boat hull because it offers superior resistance to fuel spills and dock rash, but it also means the paint has a limited life once the internal seal is broken.

Best Practices

Before you spray or dab Lund Charcoal (Catalyzed Spray Can Only) (check for code 51441), you need to shake it for 60 seconds. You can usually find your paint code on the Hull Identification Number plate located on the upper right corner of the transom or tucked near the helm controls. Since this is a two-part system, make sure you firmly press the activation button on the bottom of the container to release the hardener into the resin. Test the color on the included card to ensure the metallic flakes are suspending properly and the flow is consistent. Work in the shade to prevent the sun from drying the paint before it has a chance to level out. To avoid the mottling that ruins metallic finishes, keep the container moving in steady, overlapping passes and allow enough drying time between layers so the paint doesn't sag or trap the flakes in a thick puddle.