Lund Navy Blue Metallic (DCC3497) Touch Up Paint

The Look

This is the legendary blue that defined the Lund identity for nearly two decades. Whether you are hauling a Pro-V across a glassy bay or mooring a Baron at the dock, this color represents the professional standard of the 1990s and early 2000s. It is a deep, authoritative navy that manages to look sophisticated while hiding the inevitable water spots and lake grime that come with regular use. Since your boat has likely seen plenty of sun and waves since it left the factory, keep in mind that the original pigment may have shifted over the years, so a perfect match requires patience.

Technical Details

You are working with a metallic finish, which means there are tiny reflective flakes suspended in the blue base. This creates the depth you see in the sunlight, but it also creates a challenge for the repair. If the paint is applied too heavily in one spot, those flakes will bunch up and create dark, blotchy patches known as mottling. To avoid these stripes or spots, you must ensure the flakes stay distributed in the liquid. If the finish looks uneven or cloudy, it is usually because the flakes are not laying flat or are clustered too tightly in the wet paint.

Best Practices

Before you spray or dab Lund Navy Blue Metallic (check for code DCC3497), you need to shake the container for at least sixty seconds to wake up those heavy metallic flakes. Finding your code can be tricky on a boat compared to a car; if you cannot find a sticker near the console, locate the Hull Identification Number on the starboard side of the transom and verify it with a dealer. Work in a cool Garage or the Shade to prevent the paint from drying too fast. Always test the color on the included card before touching the hull. When applying, keep the container moving to ensure the metallic particles land in a uniform pattern. Give each layer plenty of drying time so the next pass does not disturb the flakes below, helping you maintain that crisp, factory-original look.