Scion Phantom Gray Metallic (1E3) Touch Up Paint

The Look

This color helped define the early years of the Scion brand, giving the subcompact xA and its successor, the xD, a stealthy, sophisticated edge. It is a deep, charcoal-toned gray that gives these small hatchbacks a more grounded, substantial presence on the road. Because your car has likely spent the last two decades tackling the daily commute, you probably appreciate how this shade hides road grime and light dust. It is a practical, mature choice that ages well, though it can lose its luster if the clear coat begins to thin from sun exposure.

Technical Details

This is a metallic finish, which means it contains tiny flakes designed to reflect light from different angles. Metallics require a steady hand because the flakes can settle unevenly if the coat is applied too thick. If the paint pools, you will end up with dark patches or a mottled look that ruins the factory appearance. Because this is a darker gray, any inconsistency in how the flakes lay down will be visible. You must use a clear coat over this paint to seal the metallic particles and provide the necessary gloss to match the rest of the body.

Best Practices

Before you spray or dab Scion Phantom Gray Metallic (check for code 1E3 on the ID tag inside the driver's side door jamb), you need to shake the container for at least sixty seconds. You should hear the mixing ball hitting the sides to ensure the metallic particles are not stuck at the bottom. Since your vehicle has been on the road for a while, the original finish might have shifted in tone due to UV rays. Test the color on the included card to verify the match before you touch the actual car. Work in your garage or the shade to keep the surface cool, and always keep the container moving to ensure an even flow. Allow for plenty of drying time between light layers rather than trying to cover the damage in one heavy pass.