Subaru Graphite Gray Metallic (F3T) Touch Up Paint

The Look

Your car belongs to a specific era where Subaru shifted from flat, utilitarian tones toward something more refined. On the Legacy, Outback, or the large Tribeca, this shade provides an industrial look that hides road grime. Since these models have been on the road for over a decade, you likely have hood chips or door dings that stand out against the dark pigment. This color is designed to look deep and heavy, giving the vehicle a grounded appearance that ages better than lighter silvers.

Technical Details

This is a metallic finish. It relies on a high concentration of tiny flakes to catch the light and create depth. The flakes in Subaru Graphite Gray Metallic tend to settle at the bottom of the container. If you do not mix the paint, the repair will look like a flat, muddy gray instead of a shimmering match. Because the color is dark, any unevenness in how the flakes land will show up as streaks or dark spots once the paint is dry. You will need a clear coat to match the original gloss and protect the metallic particles from the elements.

Best Practices

Open the passenger door and look at the center pillar for a silver or black plate to confirm you have code F3T. Shake the container for two full minutes before you begin. If you are using a pen or a brush, this ensures the metallic bits are not stuck at the bottom. Test the color on the included card to verify the shade before touching the car. When applying the paint, keep the container moving to prevent the product from pooling in the chip. Give each layer plenty of drying time. If the repair looks a bit dull, do not worry; the depth will return once you apply the clear coat.