Tesla Stealth Grey Metallic (PN01) Touch Up Paint

The Look

If you are driving a refreshed Model 3, you likely chose this color because it bridges the gap between a classic grey and a deep, obsidian black. It has a moodier, more aggressive presence than the older Midnight Silver it replaced. In the shade or under streetlights, it can trick the eye into looking like a solid dark finish, but as soon as the sun hits your panels, the metallic character wakes up. Because your car is still quite new, the surrounding factory paint hasn't had years to fade, which makes a color match much more predictable for your repair.

Technical Details

This is a true metallic finish, which means the paint is packed with tiny flakes that reflect light at different angles. The depth of the grey comes from these particles, but they can be tricky for a DIY fix. If you apply the paint too heavily in one spot, those flakes will sink and the area will look much darker or "muddier" than the rest of the car. If you are too light or uneven, you might see faint shadows or stripes. To keep the finish consistent, make sure you are working in a cool garage rather than direct sunlight, and always give the paint plenty of drying time between your layers.

Best Practices

You can find your specific paint information on the driver's side door jamb, usually tucked into the lower corner of the manufacturing sticker. Before you spray or dab Tesla Stealth Grey Metallic (check for code PN01), you need to shake it for at least 60 seconds to get those heavy metallic flakes off the bottom and into the mix. Test the color on the included card first to see how the metallic behaves. When applying, keep the container moving to ensure the flakes land evenly. If you are using a brush or pen for a small chip, use very thin coats to build the color up slowly rather than filling the hole in one shot.