Toyota Hypersonic Red Tricoat (3T7) Touch Up Paint

The Look

This is the high-voltage red that defined the modern Prius and Camry era. Whether you are driving a Prius Prime or a Prius v, this shade was designed to turn heads with a deep, energetic glow that makes standard reds look dull by comparison. Since your car has likely been on the road since somewhere between 2016 and 2019, the original finish has probably faced its fair share of highway debris and sun exposure. This color is bold, but it does show every tiny chip and scratch, so dabbing over those white primer spots is the only way to keep that premium factory look.

Technical Details

This finish is a complex pearl tricoat. It is not a simple one-step application. Beneath the surface, there is a base layer followed by a translucent pearl mid-coat that provides the signature depth. If you are using a pen or a can, the metallic and pearl particles in the liquid tend to settle at the bottom quickly. If they are not perfectly mixed, the color will look darker or muddier than the rest of your door or hood. You have to be mindful of how many layers of the mid-coat you apply, as each extra pass will slightly darken the final shade.

Best Practices

You can find your specific information on the driver side door jamb by looking for the sticker with the C/TR heading. Before you spray or dab Toyota Hypersonic Red Tricoat (check for code 3T7), you need to shake it for 60 seconds to get those pearl particles moving. Always test the color on the included card to see how many layers of the mid-coat you need to reach an exact match. When applying, keep the container moving to avoid heavy spots, and give each layer plenty of drying time in a cool garage or shade before you move on to the next step.