BMW 3.0 Touch Up Paint

BMW 3.0 Touch Up Paint (44 OEM Colors)

Search for your 3.0's color

How to Find Your BMW 3.0's Color Code

BMW paint color codes appear in varied spots: on the firewall, on the radiator support, on the door jamb, or in the trunk. Location varies by year; a diagram under Finding Your Color Code shows where. Typical code format example: 300, which corresponds to: Alpine White III Clearcoat. Same Color Code, Different Name: the same paint can have different names across models (e.g., 300 also called White Clearcoat, Premium White Clearcoat). The code is key to correct paint.

More about BMW color codes

BMW 3.0 Paint Info

The Color Breakdown

BMW really didn't hold back with the 3.0, recording a massive 44 colors during its run. While modern cars are a sea of grayscale, this era gave us the "Technicolor Dreamcoat" of the automotive world. We're talking about vibrant, high-energy shades like Inka Orange, Golf Green, and the deep Malaga Red. They even had a sense of adventure with names like Sahara and Tuerkis Metallic. Whether your car is a classic solid or a shimmering metallic, BMW's palette from this period was designed to stand out, not blend in.

What to Watch For

If you're looking for your paint code, pop the hood and lean over the driver's side-you'll usually find it stamped on a plate right on the strut tower or tucked near the fender edge. Now, these classic paints have a lot of soul, but they've been around the block. You might notice the paint starting to look a little "tired" or thin on the roof and hood after decades of sun. Keep a close eye on the areas around the door handles and the base of the windshield; these spots are famous for catching moisture, which can cause the paint to lift or bubble over time. It's nothing you can't handle with a little attention, but catching it early is the secret to keeping that vintage shine.

Driveway Repair Tip

When you're using a touch-up pen or brush on these classic BMW colors, remember that the metallics (like Fjord Blue or Polaris) are a bit different than the solids. Before you start, shake that paint bottle for at least 60 seconds-longer than you think you need to-to "wake up" the metallic flakes so they sit evenly. When applying, don't try to fill a chip in one big, heavy blob. Instead, think "thin and patient." Apply a tiny dab, let it dry for 20 minutes, and add another layer if needed. If the color looks a little different at first, don't panic; matching vintage paint requires patience, as the new paint often needs a day or two to fully settle and "handshake" with the original finish.

BMW 3.0 Colors by Year

Let us know the year your 3.0 was manufactured. We'll eliminate colors that won't match your vehicle.

Are we missing something?

We're always expanding our catalog! If you can't find your vehicle, please let us know and we'll do our best to find the color you need.