1992 Dodge Touch Up Paint (76 OEM Colors)

The 1992 Dodge Vibe

Welcome to 1992, the year Chrysler decided that minivans and supercars should share the same DNA-and sometimes the same shade of red. While the Caravan was busy hauling the soccer team to practice, the Viper was busy scaring the living daylights out of anyone brave enough to sit in its cockpit. It was an era of high-impact style, and our database focuses on the true survivors of the decade. We're talking about the heavy hitters like Viper Red and Monaco Red-colors so bold they practically demanded a speeding ticket just for sitting in the driveway. Whether you're touch-up prepping a Dakota, a Stealth, or the classic Ram 50, you're working with a palette that was designed to be noticed before the clear coat decided to check out early.

Paint Health Check

If you're staring at your 1992 Dodge and it looks like it's suffering from a nasty case of sunburn, you've officially entered The Peeling Era. Back in '92, the industry was still perfecting the bond between the color and the clear coat, and let's just say the factory clear had a shorter attention span than a teenager in a math class. This is the era of "Delamination." Once a rock chip or a scratch breaks that top seal, UV rays sneak in and start unzipping the clear coat from the basecoat. On these early 90s models-especially the Bright Whites and Radiant Fires-the clear coat doesn't just fade; it flakes off in sheets, leaving the color underneath exposed, dull, and defenseless.

Restoration Tip

When you're dealing with 1992 factory paint, your best friend is immediate containment. Because this era is prone to delamination, a tiny stone chip isn't just an eyesore-it's the starting point for a roof-sized peeling project. To save the finish on your Colt or Avenger, you need to seal those chips the second you see them. Lightly sand the very edges of the chip to ensure the surrounding clear coat is still firmly attached, then build up your color and clear in thin, patient layers. By sealing the perimeter, you're essentially "gluing" the edges of the clear coat down so the wind and rain can't get underneath and start lifting the rest of your paint job.